Details
ID80 V1 kit included V2 PCB.
The problem about weak hotswap socket it's been solved.
The bottom LED problem has also been solved.
We promise to guarantee all after-sales service.
ID80 Mute Cotton Foam is now complimentary.
ID80 V2 Kit Has Been Upgrade,ClickHere
Package Included
ID80 V1 CNC Case Plate + V2 Hot-swappable Type C PCB ( No Switch LED ) + Switch Puller + Type C Cable + Screws
Rubber Feet + OEM Clip PCB stabilizers ( can upgrade )
The PCB has Upgraded to V2 PCB which has underglow RGB.Just not add white switch smd
leds.
Old V1 PCB has many issues and stop production already.
PCB manuals as below
QMK Manuals:
drive.google.com/file/d/1vG8QFfP4thTHSKwY6jJltRL8cuudb-Ny/view?usp=sharing
VIA Manuals:
drive.google.com/file/d/1b529PRpWQzeSeMxxu9Wcl5o0WsMpNInI/view?usp=sharing
Add screw-in clear stabilizers:
is clear base and gold wire screw-in stabilizers which is better tactile feeling after lubing.And the wire
is hard to be off when pulling keycaps out.We add this options since many customers' requests.This
stabilizers is very hard and it can't be cut half even with a scissors.
You can add options
CNC Acrylic Bottom:Here
Used to replace the bottom aluminum cap of ID80.
And it can show the effect of light.
The keycap of The Legend:Here
Switches:Here
You only need to prepare keycaps and switches to get a fully working keyboard.
Details
You can customize every key just how you like and even put in a numpad if you'd like.
This PCB support VIA.
Crafted with CNC'd aluminum, the case is durable and stable. What’s more, the hot-swappable switch inserts
allow you to swap out switches on the fly, without ever picking up a soldering iron.
The PCB supports RGB underglow LEDs. Backed by a Type-C USB connection, the keyboard connects to
most new laptops and computers.
This PCB support VIA software.Can just message us for VIA hex file.Once it programmed with VIA
file,when you insert it to PC,VIA software can recognize it directly.
Switch led can only support 2x3x4 square and 1.8mm butterfly,and you need to solder yourself to
add switch leds,please solder switch led into PCB at first and then put on SMDswitches,or it will affect
hot swap functions.
PCB is all black color gold pad.The PCB firmware is ID80.
PCB manuals as below
QMK Manuals:
drive.google.com/file/d/1vG8QFfP4thTHSKwY6jJltRL8cuudb-Ny/view?usp=sharing
VIA Manuals:
drive.google.com/file/d/1b529PRpWQzeSeMxxu9Wcl5o0WsMpNInI/view?usp=sharing